http://www.feedstuffs.com/news/study-beefs-environmental-impact-lower-perceived?fbclid=IwAR1kjXN5EHX1LVuGHGQKxg2lseMo_NP8TSvGOn7m-37aoFXXO_SG0mEcWbs
A new study published recently in the journal Agricultural Systems is the most comprehensive beef cattle life-cycle assessment ever completed. In the report, titled “Environmental Footprints of Beef Cattle Production in the United States,” the researchers found that widely accepted measures related to beef cattle's impact in the U.S. are often overestimated. The comprehensive life-cycle assessment, conducted by the U.S. Department of Agriculture’s Agricultural Research Service and the beef checkoff, was designed to scientifically quantify the sustainability of U.S. beef production. This was accomplished by collecting and examining feed- and cattle production-related data from more than 2,200 cattle producers in seven regional production areas. Conclusions were derived using a simulation model and the regional production data to estimate national impacts in greenhouse gas (GHG) emissions, fossil energy use, blue water consumption and reactive nitrogen loss. Notable study findings include:
- GHG emissions -- Beef production, including the production of animal feed, is responsible for only 3.3% of GHG emissions in the U.S. This is dramatically lower than the often-misapplied global livestock figure of 14.5%. Furthermore, through continuous improvements in production practices, U.S. beef farmers and ranchers have avoided 2.3 gigatons of carbon emissions since 1975.
- Grain feed consumption -- Cattle consume only 2.6 lb. of grain per pound of beef carcass weight. This is comparable to feed conversion efficiencies of pork and poultry. Additionally, nearly 90% of grain-finished cattle feed is inedible to humans, meaning these plants can only provide value to people when they're upcycled by cattle into high-quality protein.
- Corn feed consumption -- Corn used to feed beef cattle represents only approximately 9% of harvested corn grain in the U.S., or 8 million acres. By comparison, 37.5% of corn acreage in the U.S. is used for producing fuel ethanol.
- Water use -- On average, it takes 308 gal. of water to produce a pound of boneless beef. Previous reports have estimated upwards of 24,000 gal. Additionally, water use by beef is only around 5% of U.S. water withdrawals, and this water is recycled.
- Fossil fuel inputs -- Total fossil energy input to U.S. beef cattle production is equivalent to 0.7% of total national consumption of fossil fuels.